Not everyone wants to crank their hand grain mill by hand all the time and that is why the Wonder Junior grain mill gives you options for other alternative powering options. These options include drill, bike power, and motor setup. To hook up the Wonder Junior grain mill to a motor or a bike you can use our Pulley Attachment or even chain sprockets. With our Drill Bit Attachment you can run the Wonder Junior with you high powered 1/2 inch drill. We have found a few examples of alternative power that people have used to operate their Wonder Junior grain mill with.
We suggest that you take precautions to make sure your alternative power setup is safe, WonderMill is not responsible for injuries caused by your alternative power setup.
This bike setup uses our Pulley Attachment to connect the Wonder Junior to a new Exercise Bike.
This next bike setup uses our Pulley Attachment to connect the Wonder Junior to an old Bicycle. (skip to 2:12 in the video to see his setup.)
Also check out this article: http://www.providentliving.org.nz/make-a-pedal-powered-grain-mill/
This is our Drill Bit Attachment in action, read our Drill Bit Attachment page for more information and recommendations for the type of drill to use.
This motorization example could have been done with the Pulley Attachment and pulleys also.
This motorization example could have been done with the Pulley Attachment and pulleys also. See our page on the setup for very detailed instructions of how it was done.